Louis, MO, USA) 11-Mercaptopropionic acid (MUA) and UDT were of

Louis, MO, USA). 11-Mercaptopropionic acid (MUA) and UDT were of analytical grade and were obtained from Fluka (New South Wales, Australia). All standard chemical Angiogenesis inhibitor solutions

or powders were protected from sunlight and kept at 25°C in a well-ventilated chemical storage cabinet and dry box. Stock solutions of sodium borohydride and l-ascorbic acid were freshly prepared for each new set of experiments. Synthesis and sample fabrication The GNRs (4.23 M) used in this study were synthesized by using the seed-mediated growth method in the presence of silver ions [25]. A 0.01 M MUA solution was prepared by mixing 0.04 g of MUA with 19.96 mL ethanol. A same concentration of UDT solution with MUA was prepared as mentioned above. The as-synthesized GNR was washed and centrifuged (6,000 rpm, 6 min) before 100 μL of MUA/UDT was added (remove excess cetyltrimethylammonium bromide (CTAB) surfactant). The LSPR peak of the samples was remained constant after 3 h of reaction time. Finally, the modified samples were washed before Temsirolimus use to avoid unpredictable interferences from the free carboxylic groups of MUA in solutions. Spectroscopic measurements The morphology of each specimen was verified through TEM analysis (JEOL, JEM-1200EX 2, Akishima, Tokyo, Japan) operating

at 80 kV. A double-beam UV–vis spectrophotometer (JASCO V-670, Easton, MD, USA) with a light path of 10 mm was used to measure the surface

plasmon resonance of GNR. All measurements were performed at room temperature using 10-mm cuvettes. X-ray photoelectron spectroscopy (XPS) measurements were conducted using an ESCA Laboratory Thermo Scientific Theta Probe spectrometer (Waltham, MA, USA) with monochromatic Al Kα radiation (1,486.68 eV). C (1s) peak was used as an internal standard calibration peak at 284.6 eV. PIK3C2G Results and discussion Figure  1a,b shows transmission electron microscopy (TEM) images and a particle size distribution of MUA which illustrates that no physical characteristic dissimilarity was found with as-synthesized GNR upon modification of GNR-MUA. The TEM image does not exhibit any corrosion, aggregation, or other defect (Figure  1a). The particle size analysis was carried out by counting about 100 particles for each specimen. It is estimated that the GNR has an average length of 53.93 ± 3.81 nm and diameter of 16.47 ± 1.76 nm, while the average length of as-synthesized GNR is 56.24 ± 3.47 nm and average diameter is 16.62 ± 1.60 nm (Figure  1b). Figure 1 TEM, size distribution, UV-visible-IR extinction spectra, and functionalized GNR ligand. TEM images of GNR-MUA (a). Size distribution of GNR-MUA (b).

Comments are closed.